EASTERN INSTRUMENTS

CENTRIFEEDER ICV: TECHNICAL INFORMATION

Centriflow<sup>®</sup> Solids Mass Flow Meter Technical Information
The CentriFeeder® line of feeders allow for both an accurate, real-time flow measurement, as well as a near perfect control of flow rate and total. For blending applications, control the flow rate of an individual ingredient, or combine several CentriFeeders for near perfect recipe control. If you are controlling ingredients entering a batching process, use the CentriFeeder for controlling the total of one or more ingredients entered into the batch.

The CentriFeeder with ICV is an integrated flow meter and Control Valve (Slide Gate) which enables the device to accuratelty measure and control any granular product. Below you will find manuals and other technical information regarding the operation and maintenance of the CentriFeeder ICV.


TECHNICAL DOCUMENTATION





MANUALS


Below, you can find the manuals for the CentriFeeder ICV. The manuals have been divided into the Mechanical Manual for the feeder itself, the Electronics Manual for the use of the electronics and communications and the Wiring Manual for wiring the electronics and meter module properly.

MECHANICAL MANUALS




CentriFeeder Mechanical Manual

I & O Manual - CentriFeeder ICV - Mechanical

CentriFeeder ICV Specification Drawings


ELECTRONICS MANUALS




CentriFeeder Electronics Manual

I & O Manual - Digital CentriFeeder Electronics v. 6.5.0

I & O Manual - Digital CentriFeeder Electronics v. 6.3.2

I & O Manual - Digital CentriFeeder Electronics v. 6.2.2

I & O Manual - Digital CentriFeeder Electronics v. 6.2.0

I & O Manual - Digital CentriFeeder Electronics v. 6.1.4

I & O Manual - Digital CentriFeeder Electronics v. 6.0.0

I & O Manual - Digital CentriFeeder Electronics v. 5.5.0

I & O Manual - Digital CentriFeeder Electronics v. 1.0.0


I & O Manual - Digital CentriFeeder MCV Electronics v. 6.5.0


CentriFeeder Screen Guide

WIRING MANUALS




CentriFeeder Wiring Manual

Wiring Diagram - Software v. 6.22




TROUBLE-SHOOTING AND PROCEDURES


For minor troubleshooting and repair procedures, please see below. If further assistance is needed, please contact us or schedule an onsite technician for assistance.

HOW TO PROCEDURES




CentriFlow Procedures

How To - Setup for Multiple Calibration

How To - Setting the Virtual Flow Stop

How To - Stroking the ICV

How To - Setting the Rate Alarm

How To - Setting the Totalization Alarm

How To - Inspecting the ICV

How To - Performing a Product Calibration

How To - Performing a Static Calibration

How To - Setting the Auto Delay

How To - Logging in to the HMI

How To - Using the Compact Flash Card

How To - Running the ICV